How to make pellets? First, you need a chipper shredder.Our drum chipper for pellet machine can be logs, wood branches, slab, waste veneer, bamboo, cotton stalks and other non-wood fiber stalk cutting into standard sheet material, for manufacturing particleboard, fiberboard, plywood and non-wood pulp and paper the basic raw materials.
Drum chipper advanced structure, cutting sheet material of high quality raw materials, wide adaptability, easy operation and maintenance, the machine from the base, knife roller, upper and lower feed rollers, conveyors, hydraulic systems and other components.
Frame welded steel using high-pitched degree, is supporting the whole machine base; installed on two knife roll, made with a special knife bolts through the pressure block , knife and fixed knife roller; according to the cutting materials of different thickness, by means of the feed roller assembly hydraulic system can fluctuate within a certain range; cutting sheet material passing down through the net sieve set , a row at the bottom , a large sheet material in the chipper shredder will be further cutting .
Hydraulic system: from the hand pump oil to the tank, you can start casing, easy blade replacement; repair time can be looked at on the feed roller assembly, easy to adjust the cutter, knife at the end of the gap and the comb plate disassembly.
|Model||knife roller Dia (mm)||knife Qty (pcs)||Inlet orifice (mm)||Input Dia(mm)||Chips size||Power(KW)||Rotary speed/rpm||Capacity tons/hour||Overall size (mm)||Weight (kg)|